fracturing load meaning in English
断裂负载
断裂载荷
破坏荷载
致断负载
Examples
- It is concluded that the coulomb - type crack model is suitable for simulation of the interfacial fracture under mixed - mode fracture loads , however further work is still needed for improvement of its dilatancy properties
通过对数值结果的分析比较得出结论：库仑型裂纹模型比较适合模拟复杂载荷下的界面断裂行为，但是其扩容特性仍有待改善。 - Artificial nerve network forecasted yso in clay p - y curves is researched and 8 physical parameters are studied by using the principal component analysis method when the fracture load was not reached for a trial pile under lateral load , the ultimate load of the pile might be predicted to the field - surveyed load settlement data of existing trial pile and by h - s curve extension method and hyperbola method
在对粘性土p - y曲线计算参数y _ ( 50 )的研究中，对粘性土常规8个物理性质指标进行主成分分析，研究用人工神经网络分析预测粘土p - y曲线中的y _ ( 50 ) 。建立了神经网络计算模型，可用来计算预测粘性土p - y曲线中的y _ ( 50 ) 。 - The method for measuring the plane strain fracture toughness klc has been introduce to high polymer bonded explosives ( pbx ) by systematically studying technologies concerning the shape of specimen , the depth and its machining of crack , the loading rate , the measurement of critical fracture load , and the computation of klc , etc . the method has been used to test and study klc of three typical high polymer bonded explosives which are j2 , jl , j3 respectively both at normal temperature and unmoral temperature
本文以高聚物粘结炸药为研究对象，对测试高聚物粘结炸药的平面应变断裂韧度所涉及的样品形状、裂纹深度及裂纹制备、加载速度、临界断裂载荷p _ q的确定及平面应变断裂韧度k _ ( ic )的计算等方面进行深入研究，建立了较为完善的炸药平面应变断裂韧度测试方法。 - Aiming at the simulation of quasi - brittle fracture of concrete - like materials , the qualitative comparison of the selected models was focused on the follow aspects , i . e . the simulation of the fracture behaviors of crack mode and crack mode by use of the selected models and the simulation of dilatancy properties of the selected models under mixed - mode fracture loading conditions
在对选择的典型黏性界面裂纹进行定性分析比较时着重考虑以下两点：采用选择的模型对型裂纹和型裂纹的断裂行为进行数值计算；对混合型断裂载荷作用下模型的扩容行为特性进行数值分析。